Volumes 1- 13(Oct. 2000-Oct. 2003)
Index prepared by Bob Milardo

Volumes 14 - Current (Jan. 2004 - )
Index prepared by Todd Talsma

Binders

• Modified Garrison Volume 5, Page 11

Book Reviews

• At the River’s Edge by Jerry Kustich reviewed by Kathy Scott Volume 10, Page 5
• Bamboo Fact, Fiction and Flyrods by R. E. Milward reviewed by Bob Maulucci Volume 4
• Casting a Spell by George Black reviewed by Tom Goodmann Volume 25, Pages 24-27
• Extreme Flyfishing by R. L. Nunley reviewed by Harry Boyd Volume 8, Page 4
• Moose in the Water, Bamboo on the Bench by Kathy Scott reviewed by Russ Gooding Volume 4
• Oregon Bamboo by Joseph Beelart, Jr. Reviewed by Ward Tonsfeldt Volume 26, Pages 57-58
• Positive Fly Fishing by Marla S. Blair, Reviewed by Tom Goodman Volume 27, Pages 37-38
• Rod Crafting by Jeffrey Hatton reviewed by Tom Goodman Volume 26, Pages 41-44
• Split and Glued by Vincent C. Marinaro Book Excerpt Volume 26, Pages 18-26
• Split and Glued by Vincent C. Marinaro Book Review Volume 29, Pages 11-13
• Split-Cane Rods - Bamboo Treasures (English Version) Review Volume 31, Pages 45-47
• Splitting Cane by Ed Engle reviewed by Tom Goodman Volume
  9, Pages 6-7

Cane Rods

• A Steelhead Rod for the Pere Marquette Volume 21, Pages
  19-21
• Aging, deterioration Volume 9, Pages 22-24, 25-30
• Bamboo Rods and Argentine Fly Fishing Volume 15,
  Pages 21-25
• Burnout, Volume 16, Page 4-7
• Nymphing with Cane Volume 4
• Selecting a Split Bamboo Fly Rod Volume 4
• Steelhead Volume 10, Pages 35-40, Volume 11, Pages 45-49
• Thoughts About Bamboo Fishing & Rodmaking Volume 14, Pages 13-18

Catalogs

• Edwards ca 1955 Supplement to Volume 10 
• Leonard Supplement to Volume 10
• Orvis 1974 Supplement to Volume 10 
• Young 1974 Supplement to Volume 10 

Classic Rods and Rodmakers

• Divine Volume 11, Pages 14-15
• Wes Jordan’s Cross Rods Volume 11, Pages 16-18

Drip tubes, see Varnish

Ferrules

• Bluing Volume 12, Pages 7-8
• Dimensions Volume 6, Page 37
• Dressing tabs Volume 5, Pages 9-10
• Feathering & Crowning Ferrules Volume 20, Pages 28-32
• Fitting Volume 11, Pages 39-42
• Making Double-Six Ferrules Volume 27, Pages 40-44
• Making Ferrules with Nickel/Silver Tube Volume 25, Pages 14-17

Ferruling (Complete instructions including pinning) Volume 13, Pages 6-12

• Lapping Volume 7, Pages 13-14
• Making Bamboo Ferrules Volume 4, 7, Pages 16-17, Volume 8, Pages 24-33
• Making N/S Volume 1, Volume 6, Pages 29-38
• Serrations Volume 1, Volume 3, Volume 12, Page 10
• Station cutters (LeClair) Volume 3, Volume 7, Pages 9-10
• Station cutters (shop made) Volume 12, Page 11

Fiction, see Tails

Fishin’ Cane

• Bill Campbell, Montana Volume 17, Page 51

Flaming cane Volume 3

Flies

• Adams Volume 19, Pages 41-42
• Catskills Style Volume 23, Pages 58-60
• Carrie Stevens and the Gray Ghost Volume 26, Pages 11-13
• Edson Dark Tiger Volume 18, Pages 44-46
• McGinty Volume 21, Pages 50-52
• Montreal Volume 22, Pages 71-73
• My Friend Carl Richards Volume 24, Pages 59-60
• Parmachene Belle Volume 20, Pages 50-52
• Partridge & Orange Volume 17, Pages 62-70
• Professor, The Volume 15, Pages 32-34
• Royal Coachman Volume 16, Pages 36-38

Fly lines

• Breaking In, Fishing, Maintaining and Repairing the Finish of Silk Fishing Lines Volume 28, Pages 66-70
• Constructing loops Volume 12, Pages 12-13
• Silk Volume 6, Pages 24-25

Forms

• Making Metal, Part I Volume 17, Pages 42-48
• Making Metal, Part II Volume 18, Pages 47-52
• Tune up Volume 5, Pages 23-24
• Wooden Volume 6, Pages 20-23

Gatherings

• Canadian Cane 2005 Volume 20, Pages 47-49
• Catskill 2002 Volume 9, Pages 11-13
• Catskill 2004 Volume 18, Pages 21-24
• Chicago, 2003 & 2004 Volume 16, Pages 43 & 44
• Colorado Rodmakers Reunion 2004 Volume 17, Pages 92-98
• Colorado Rodmakers Reunion 2005 Volume 21, Pages 46-48
• Colorado Rodmakers Reunion 2007 Volume 29, Pages 55-80
• Corbett Lake 2006 Volume 24, Pages 18-24
• Grayrock 2002 Volume 8, Pages 7-9
• Grayrock 2004 Volume 16, Pages 51-54
• Grayrock 2006 Volume 25, Pages 9-12
• Grayrock 2007 Volume 28, Pages 41-43
• Italian 2005 Volume 20, Pages 14-21
• Italian 2007 Volume 28, Pages 21-30
• International German 2007 Volume 30, Pages 13-18
• Livingston, MT 2002 Volume 9, Pages 15-17
• Metolius Bamboo Rod Fair 2004 Volume 17, Pages 53-61
• Metolius Bamboo Rod Fair 2005 Volume 21, Pages 10-15
• Midwest Flyfishing Expo 2004 Volume 15, Pages 44-45
• Fourth Annual One Day Wonder Rod (2004) Volume 18,
  Pages 5-7
• Oregon, Metolius River 2002 Volume 9, Pages 33-36
• Oregon 2002 Volume 11, Pages 8-9
• Oregon 2003 Volume 13, Pages 21-22
• Penobscot Gathering 2005 Volume 22, Pages 68-69
• Penobscot Gathering 2006 Volume 28, Pages 92-94
• Southern 2000 Volume 2
• Southern 2001 Volume 3
• Southern 2002 Volume 10, Pages 17-19
• Southern 2003 Volume 14, Pages 41-44
• Southern 2004 Volume 19, Pages 29-36
• Swiss Rodmakers 2006 Volume 25, Pages 30-35

Greenheart rods Volume 12, Pages 20-21

Grips

• Fly Rod Grips, Part I Volume 16, Pages 39-42
• Fly Rod Grips, Part II Volume 17, Pages 23-41

Heat treating Volume 5, Pages 4-5, Volume 6, Pages 18-19, Volume 6, Pages 26-28

^{Milling machines} Volume 2

Morgan Hand Mill

• Building Rods with the Morgan Hand Mill Volume 26, Pages 31-34
• Hand Mill Corner (Holddown) Volume 28, Pages 32-34
• Hand Mill Corner (Preparing Strips) Volume 30, Pages 21-25

^{Miscellaneous}

• Bamboo Rodmaking 2007 Volume 29, Pages 47-53
• Comparing Various Fly-Fishing Lines Volume 27, Pages 14-19
• Have We Gone Too Far? Volume 21, Pages 33-34
• Making a Furled Leader Volume 23, Pages 27-35
• Making a Magnetic Fly Box Volume 24, Pages 27-29
• Silk (The Essence of Quality & Luxury) Volume 20, Pages
  43-45
• Unintentional Collector, The Volume 29, Pages 83-90
• What’s it worth to you? (Condition Factors I) Volume 20, Pages 23-26
• What’s it worth to you? (Condition Factors II) Volume 21, Pages 23-26
• Winston Bamboo, A Farewell Volume 22, Pages 4-6

Nodes

• Displacing Volume 6, Page 10
• Testing...Testing...Nodes That Is! Volume 22, Pages 64-67

^{Nonfiction, see Fiction}

Ovens

• Convection plans Volume 11, Pages 31-37
• See also Heat Treating

Planing

• Blade angles Volume 2
• Power planing linear tapers Volume 13, Pages 23-25
• Techniques Volume 8, Pages 17-18

Product Reviews

• Heat treating fixtures Volume 8, Page 12
• Jeff Wagner Binder Volume 26, Pages 60-62
• JW Bamboo Mill Volume 6, Pages 7-8
• JW CNC Finish Mill Volume 24, Pages 39-49
• Larson (Rush River Rods)
• Reel seat mandrel, spacer sanding blocks Volume 11, Pages 29-30
• Quad form setting tool Volume 11, Pages 30
• LeClair Ferrule and Reel Seat Station Cutters Volume 3
• Love Ferrule Station Cutters Volume 9, Pages 8-9
• Morgan Hand Mill (Mill modification) Volume 11, Pages 22-23
• Nodeless Clamps, Done Schneider Volume 21, Pages 5-9
• Nunley MegaBlue (bluing product) Volume 12, Pages 7-8
• Preusch 4-String Binder Volume 10, Pages 10-11
• Reel Seat Blanks, The Right Way Volume 27, Pages 24-25
• Reiter Bamboo Oven Volume 6, Pages 11-12
• Rodmakers data base program Volume 3
• Silk Fly Lines, A New Tradition Volume 27, Pages 32-33
• Snake Brand Agate Stripping Guides Volume 16, Pages 15-18
• Star Splitters Volume 8, Pages 11-12, Volume 11, Page 27
• SuperBlue Volume 19, Page 28
• Veritas Low Angle Block Plane Volume 14, Pages 29-34
• Weldy Heat Gun Volume 22, Pages 57-64
• WorkSharp WS3000 Sharpening System Volume 31, Pages 42-43

Reel Seats

• Aluminum Cap & Rings Volume 16, Pages 45-50
• All Cork Reel Seat Volume 25, Pages 28-29
• Cork Reel Seat Inserts Volume 24, Pages 52-56
• Low Cost Reel Seat Mortiser Volume 25, Pages 38-41
• Making Cap & Rings Seats Volume 2, Volume 5, Pages 27-34
• Mortised inserts Volume 3
• Making Reel Seat Inserts by Tony Spezio Volume 15, Pages 7-9

Rod Design

• Designing a Bamboo Rod Taper Volume 27, Pages 8-12
• Review of Mr. Garrison’s Fly Rod Designs, A Volume 28, Pages 84-91
• Stress Curves 102 Volume 28, Pages 15-19
• Ultimate Basic Taper, The Volume 27, Pages 50-53

Rodmakers, Profiles

• Barnes, George Volume 24, Pages 7-12
• Beasley, Rev. Jim Volume 19, Pages 38-40
• Bureau, Jim Volume 15, Pages 11-16
• Byrd, Joe Volume 10, Pages 27-32
• Calviello, M. F. Volume 12, Pages 28-33
• Champion of Rodmaking, A (George Maurer) Volume 31, Pages 12 & 13
• DeGere, Francis Digger Volume 7, Pages 19-22
• Edwards, Bill Volume 3
• Fink, Bill Volume 25, Pages 5-6
• Flick, R.A. Volume 1
• Fries, Bjarne Volume 9, Pages 40-45
• Hatton, Jeff - 10 Questions with Volume 31, Pages 63-67
• Hoergaard, Asbjoern Volume 2
• Maca, Wayne Volume 17, Pages 5-8
• McDowell, Chris Volume 2
• Moon, Ralph Volume 23, Pages 41-47
• Morgan, Tom Volume 5, Pages 12-22
• Our Friend Harold (Demarest) Volume 28, Pages 12-13
• Perrigo, Joseph Volume 2
• Powell, E. C. (Reprint The Creel, 1969) Supplement to Volume 10 
• Thramer, A. J. Volume 4
• Young, Paul (Reprint from Fishermen’s Digest, 1958) Supplement to Volume 10 

Rodmakers, Musing on Techniques

• 4, 5 and 6 Strip Split Cane Rods Compared, Fenner, J.H. Volume 28, Pages 62-64
• Barch, Ron Volume 8, Pages 19-21
• Enders, Todd Volume 22, Pages 25-28
• Don’t Try This at Home! Salmi, Tapani Etal Volume 24, Pages 32-36
• Fink, Bill Volume 5, Pages 6-7
• Smithwick, Tom Volume 14, Pages 7-10
• Spezio, Tony Volume 10, Pages 14-16
• Salmi, Tapani Volume 21, Pages 36-40
• Wendt, Mark Volume 10, Pages 7-8, Volume 11, Pages 12-13

Sharpening

• Sharpening Station Volume 30, Pages 54-69
• Stropping set up Volume 10, Page 34

Shop safety

• Material Safety Data Sheets Volume 12, Pages 35-39

Shop Tools

• 45 Degree Depth Indicator Volume 28, Pages 36-39
• Beveler Arbor Construction, Volume 21, Pages 28-30
• Building a Power Beveling Mill on a Budget Volume 20, Pages
  7-10
• Computer Numeric Control Machine Volume 21, Pages 42-44
• Cork Boring Jigs Volume 14, Pages 38-40
• Cork Drill Volume 16, Pages 32-34
• Cork Ring Slicing Jig Volume 14, Pages 27-28
• Dial Indicator Base Volume 27, Pages 27-30
• Expanding Draw Collet Volume 15, Pages 35-40
• Ferrule Serration Jig Volume 19, Pages 6-12
• Flyrod wrapper Volume 4
• Forms Tune-Up Volume 27, Pages 21-22
• Jig for Wrapping Rattan, A Volume 16, Pages 20-25
• Heat Treating Fixture Brackets Volume 14, Page 4
• How to Make a Scraper Volume 28, Pages 72-75
• Lathe Support Volume 17, Page 22
• Making a Low Cost Beveler Volume 24, Pages 63-68
• Mini Beveler/Thickness Planer Volume 29, Pages 6-8
• Planes Volume 4
• Rod turning jig Volume 3
• Sharpening Station Volume 30, Pages 54-69
• Steam Box Volume 19, Pages 17-20
• Versatile Wrapping Jig, A Volume 30, Pages 39-42

Software

• RodDNA Volume 17, Pages 71-91
• RodDNA Workshop I Volume 20, Pages 53-67
• RodDNA Workshop II (Number Magic) Volume 21, Pages 53-60
• RodDNA Workshop IV (Setting Default Values) Volume 22, Pages 74-80
• RodDNA Workshop: Number Magic, Part 2 Volume 23, Pages 61-66
• RodDNA Workshop: The Devil is in the Variables Volume 27, Pages 61-66
• RodDNA Workshop: The “Golden” 30 Feet Volume 25, Pages 46-54
• RodDNA Workshop: The “Golden” 30 Feet, Part 2 Volume 26, Pages 64-69

Splitting Cane Volume 3

Stress curve calculations for quads and pentas Supplement to Volume 10

Strip Preparation

• On Straighter Strips Volume 23, Pages 19-20
• Practical Method for Steaming Nodes, A Volume 24, Pages 15-16
• Soaking Volume 8, Page 17
• Straightening Volume 8, Pages 35-36

Stress Curves

• On the Use of Stress Curves Volume 22, Pages 53-56

Tails

• A Fish Story by Linda Reiter Volume 18, Pages 65-68
• “A Rodmaker’s Dream” by Mike St. Clair Volume 30, Page 6
• Bamboo, Brookies and an Antique Stream by Rob Jagodzinski Volume 17, Pages 99-103
• Baptism by Bret Reiter Volume 10, Pages 24-26
• Bellinger Experience, The by Dan Dixon Volume 22, Pages
  17-21
• Bridge Pool, The by Bill Walters Volume 26, Pages 15-16
• Cane & Callaway - A Fishing Bag Primer Volume 28, Pages 77-82
• Conception by Kathy Scott Volume 15, Page 18
• Dances with Hexes Volume 27, Pages 46-48
• The Dangerous Petition by Bob Milardo Volume 11,
  Pages 24-26, Volume 12, Pages 42-44, Volume 13,
  Pages 35-36, Volume 14, Pages 35-37
• The Divining Rod by Jerry Kustich Volume 10, Pages 14-16
• Early Western Flyfishing Volume 22, Pages 45-51
• Fall Bamboo Fishing Fantasy Volume 22, Pages 34-41
• First Cane on the West Branch by Bob Milardo Volume 10, Pages 22-23
• Flyshishing by Don Johnson Volume 14, Pages 45-46
• For the Love of Cane by Carl DiNardo Volume 13, Pages 26-27
• Full Zen: The Master’s Guide to Building Bamboo Fly Rods by B. Milardo Volume 7, Pages 23-27
• Heretical Apprentice, The by Mark Wendt Volume 19, Pages 43-46
• Home, Sweet Rod Shop by Carl DiNardo Volume 15, Pages 4-5
• Is that a Winston? by Ralph Moon Volume 27, Page 35
• Little Billy by Mark Wendt Volume 9, Pages 37-39
• The More You Rake, The More You Rake by Carl DiNardo
  Volume 14, Pages 25-26
• A Page from a Fisherman’s Diary: Jim Payne by Hal Bacon Volume 9, Pages 31-32
• Rodmaker’s Trip to Mecca, A Volume 16, Pages 28-30
• Rodmaking Stupidity by Jeff Wagner Volume 20, Pages 35-41
• Salmonator, The Part I by Don Johnson Volume 15,
  Pages 51-53
• Salmonator, The Part II by Don Johnson Volume 15,
  Pages 55-58
• Snake Rod by Bob Nunley Volume 7, Page 7
• Wooden’ It be Nice by Peter Dallman Volume 23, Pages 50-54
• World’s Sexiest Rod by Chris Bogart Volume 28, Pages 45-50
• Yellowstone Cuttie-thon, The by Zac Sexton Volume 23, Pages 11-17

Tapers, Hex

• 8’ 5 wt Dry Fly Rod Volume 15, Page 14
• A&F Yellowstone Special, 8’ 3pc 3wt Volume 23, Pages 38-39
• Amherst Scarborough 8.5’ 3pc 5/6 wt Volume 9, Pages 20-21
• “Battenkill” (not an Orvis) 7.5’ 2pc 4wt (var Dickerson 7612) Volume 5, Page 25
• The Big Little 7’ 3pc 4wt Volume 13, Page 33
• Cross South Bend Model 1927 9.5’ 3pc Lt. Salmon Volume 11, Page 17
• Model 1500 7.5’ 2pc 5wt Volume 11, Page 18
• Digger Model 171 “Ice Cream Parlor Pole” 6.75’ 2pc 2wt Volume 7, Page 21
• Divine Fairy Rod, 7’6” 3pc 3/4wt Volume 25, Pages 20-21
• Divine Special Dry Fly H7952 9.5’ 3pc 5/6wt Volume 11, Page 15
• Drake G212E-7H 8’ 2 piece 7wt, Hollow Built Volume 21, Page 21
• Rainbow R4455 8.5’ 3pc 4/5 Volume 11, Page 15
• Gene Edwards 7.5’ 3pc 3/4 wt Volume 8, Page 16
• “Favorite” 7.5’ 3pc 5/6 Volume 8, Page 16
• Heddon Folsum #1015, Volume 30, Pages 28 & 29
• Heddon Folsum #1410 8’ 3 pc, 5/6 wt Volume 19, Page 14
• Herter tapers Supplement to Volume 10 
• Linear 7.5 2pc 4wt Volume 13, Pages 24-25
• Lyon & Coulson 7’6” Imperial Volume 18, Pages 10-11
• Montanan 7.5’ 3pc 5wt, (var Para 14) Volume 4
• Montague Red Wing 8’6” 3pc 6/7 wt Volume 29, Pages 28-30
• Montour Creek 8’ 3pc 4wt, (var Dickerson 7612) Volume 9, Page 40
• Montour Creek Kin-Jim Wilcox. 7.5’ 2pc 5wt (var Dickerson 7612) Volume 10, Page 34
• Powell B9 9’ 3pc 8wt Volume 10, Pages 38-39
• Ruby River 8’ 3pc 5wt Volume 3
• Shakespeare 8’6” 3/4wt Volume 28, Pages 52-54
• Tensleep Creek 7’ 2pc 4wt (var Dickerson 7012) Volume 7, Page 12
• Thomas, FE Special 9’ 3 pc, 4wt Volume 17, Pages 10 & 11
• Trade Rod by Edwards for Edward vom Hofe (8’ 3/2 Dry & Streamer tips) Volume 22, Page 32
• Weber Henshall HandKraft 3500, 9’ 3pc 6/7 wt) Volume 26, Pages 36-38
• Wolverine Creek 8.5’ 3pc 9wt (var Dickerson 8615 7wt) Volume 6, Page 14
• Young Para 15 8’ 2pc, 6wt Volume 4
• Young Perfectionist 7.5’ 2pc 4wt Volume 4

Tapers, Quads

• Chapman 8’ 2pc 5wt Supplement to Volume 10
• Bill Edwards Model 50 8’ 2 pc 5/6wt Volume 1
• Quad #25 7’ 2 pc 4wt (DT) Volume 3
• Quad #35 8.5’ 2pc 6wt (DT) Volume 3
• Quad #35 8.6’ 3pc 6wt Supplement to Volume 10
• Quad #40 8’ 2pc 5wt Supplement to Volume 10
• Quad #42 7.5’ 2pc 5wt Supplement to Volume 10
• Quad #50 8’ 3pc 5/6 wt Supplement to Volume 10
• Clear Creek 6.5’ 2pc 3/4/5wt (var Thomas & Thomas) Volume 8, Page 15
• John Irgens 6’ 2pc 4wt Supplement to Volume 10
• Sir D 7’ 2pc 4wt (converted from the original hex) Volume 1
• Tom Smithwick 6.25’ 2pc 4wt Supplement to Volume 10
• JK Wheeldon 7.75’ 2pc 5wt Supplement to Volume 10

Tapers, Spey

• Hoergaard Alta 14’ 3pc 10wt Volume 2
• HC. 12’ 3pc 9 wt Volume 2
• Tana 13.5’ 3pc 10wt Volume 2

Techniques

• Agate stripping guides Volume 11, Pages 43-44
• Another Path to Mortised Butts by Robert Kope Volume 22, Pages 12-13
• Another Use for Corncobs Volume 30, Pages 8-10
• Bamboo Reel Seat Inserts Volume 18, Pages 27-33
• Birch Bark Grips Volume 30, Pages 44-51
• Building Smarter Blanks Volume 14, Pages 20-23
• Building Smarter Blanks, Part II Volume 15, Pages 27-30
• Building the Universal Ferrule Volume 18, Pages 58-64
• Dip Tube Construction Volume 22, Page 43
• Drive belts Volume 3
• Dyeing cane Volume 13, Pages 28-29
• Easy and Efficient Scraper Volume 31, Pages 16-18
• Fine Art of Product Photography, The Volume 15, Pages 46-48
• Flaming a Culm, An Alternative Approach Volume 26, Pages 46-49
• Frankenpregnator, The Volume 29, Pages 33-44
• Heat treating spare strips Volume 3
• Hollow Building, Part I Volume 17, Pages 13-21
• Hollow Building, Part II Volume 18, Pages 13-18
• Hollowing a Different Way Volume 26, Pages 5-7
• Low Cost Splicing Jig Volume 26, Pages 51-55
• Making Bamboo Ferrules Volume 30, Pages 33-36
• Making Convex Knurls Volume 27, Pages 55-59
• Making Nodeless Strips Volume 29, Pages 16-18
• Making Reel Seat Inserts by Tony Spezio Volume 15, Pages 7-9
• Mortised Rods, the 12 Strip Butt by Jeff Hatton Volume 22, Pages 8-14
• Mortised Rods, A Different Approach by Al Medved Volume 23, Pages 6-8
• New Version of the Quad Bamboo Ferrule Volume 28, Pages 56-60
• Norwegian Wood: Birch Bark Handles Volume 15, Pages 41-43
• Pinning Ferrules Volume 31, Pages 34-40
• PMQ, revisited Volume 16, Pages 9-14
• Potassium Permanganate Toning Volume 18, Page 19
• Powell taper calculator Supplement to Volume 10
• Power planing linear tapers Volume 13, Pages 23-25
• Reel Seats with Birch Bark Inserts Volume 31, Pages 58-60
• Setting Depth Gauges: The .1155 Method Volume 15, Pages 49-50
• Signing blanks Volume 11, Pages 27-28
• Splicing (Sans-A-Bitch quad design) Volume 12, Pages 15-18
• Straight Nodes Made Easy Volume 18, Pages 53-57
• Taking the Hassle out of Removing Epoxy From Blanks Volume 19, Pages 22-25
• Turning Your Own Reel Seat - Drill Press Method Volume 31, Pages 52-56

Travel

• A Bamboo Rod Love Story Volume 18, Pages 34-42
• Back From Patagonia... Volume 31, Pages 22-31
• Black Forest, Germany Volume 12, Pages 23-26
• Boise, Idaho Volume 13, Pages 16-20
• Travel rods Volume 12, Pages 23-26

Varnish

• Drip tubes Volume 2

Video Reviews

• Graphite Fly Rod, The - How to Build a Modern Classic Volume 31, Page 20
• Power milling (by Goldenwitch) Volume 11, Pages 20-21

Videos

• Brush Finishing, Bill Harms, Grayrock 2004 Supplement to Volume 17
• Finishes, Mike Brooks, SRG 2004 Supplement to Volume 19
• Reel Seat Insert Turning, Tony Spezio, SRG 2004 Supplement to Volume 20
• Straightening Blanks, Harry Boyd, SRG 2007 Supplement to Volume 31
• Using Planing Forms, Jeff Wagner, Grayrock 2005 Supplement to Volume 21

Workshops

• Calviello, Marcelo Volume 29, Pages 21-25

Power Fibers
Todd Talsma, Editor
8412 North Maple Court
Zeeland  MI  49464
616-772-5043
power.fibers@bamboorodmaking.com